Pierobon X60R2018-08-30T17:11:44+00:00

X60R: Chassis kit for Ducati 2 valves air-cooled engines.

X60R is a Race chassis kit for Ducati 2 valves air-cooled engines.

CONCEPT

X60R is the extreme evolution of F042 concept.

To enhance the feeling and traction of the bike and its aerodynamics, a new box-section swingarm and
bodywork are added to the aluminium alloy trellis frame, weight 6,32 kg.
The new swingarm is made in box-section aluminium alloy, weight 3,96 kg.The new bodywork is carefully designed for aerodynamic efficiency. The increased radiator is integrated in
the lower fairing to convey effectively the flow of air into the engine. The air ducts positioned are precisely
calculated to provide ample air delivery to the pressurised airbox.

Its captivating lines and exceptional motogp performance have only a goal … excite!

It’s possible to order the complete motorcyle or the kit, which together with other components, allow you to
built your own bike.

Make a request

BASE KIT

Here you find the parts strictly necessary to build the motorcycle:
– frame, available for Pierobon, Supersport, Hypermotard and Sportclassic airbox;
– swing arm, available in two versions: one derived from Supersport, one box-section swing arm derived from Motogp.
If you have a Ducati Supersport MY 2003, 2004, 2005 or 2006 swing arm, it’s possible make an upgrade that allow you to mount the swing arm on the motorcycle (upgrade code F04300A200);
– front sub frame, available for different instrumentations;
– rear sub frame;
– fuel tank and its cap. It’s possible mounts both the fuel tanks: X60R and F042;
– pump kit. There’s PIerobon-Walbro fuel pump. Or you can use also Ducati Hypemotard fuel pump;
– exhaust system, available in “2 in 1” side version by Pierobon-Termignoni;
– foot peg kit, available with standard or reversed gear lever, and with fixed or pivoted pegs;
– bodywork: front body panel with windshield, lower fairing and rear body panel. Available in fiberglass or carbon fiber.

DATA SHEET

FRAME Frame made in tubular aluminium EN AW-7020 trellis.  Weight 6,36 kg.
WHEELBASE 1400 mm
RAKE 22,5°
SWING ARM Box -section swing arm in aluminium EN AW-7020, weight 3,96 kg, derived from MotoGp. Splitable chain adjuster kit in aluminium EN AW-6082.
FRONT SUB FRAME In aluminium EN AW-6082, for AIM instrumentation. Weight 0,55 kg.
REAR SUB FRAME In aluminium EN AW-6082, for Termignoni exhaust system. Weight 0,77 kg.
FUEL TANK Hand made in aluminum alloy Peralluman 450 (EN AW-5083) H111. Weight 3,48 kg. Capacity 16L.
PUMP KIT Pierobon-Walbro pump kit.
ENGINE Ducati 2V 1100 Evo – 120 hp @ 7800 rpm
EXHAUST SYSTEM Pierobon stainless steel exhuast pipes and Termignoni carbon fiber and titanium exhuast silnecer. “2-1” configuration, equipped with 2 lambda probes.
FRONT SUSPENSION Ohlins FG RT 815 53/56 L730 upside-down fully adjustable lightweight fork with radial caliper support.
REAR SUSPENSION Progressive cantilever linkage with fully adjustable Öhlins DU 235 monoshock.
TRIPLE CLAMP Pierobon triple clamp in aluminium EN AW-6082. Weight 1,34 kg.
FRONT WHEEL OZ-Pierobon in aluminium 5 spoke 3,50 x 17.
REAR WHEEL OZ-Pierobon in aluminium 5 spoke 5,50 x 17.
FRONT TYRE Pirelli Diablo Superbike PRO 120/70 ZR 17.
REAR TYRE Pirelli Diablo Superbike PRO 180/55 ZR 17.
FRONT BRAKE 2x BRAKING 305 mm semi-floating discs, BREMBO twin monobloc calipers four pistons, 2-pad.
REAR BRAKE 245 mm BRAKING disc, single piston BREMBO caliper.
CONTROLS Pierobon handlebars in aluminium EN AW-6082. Weight 0,56 kg.
Pierobon foot peg kit in aluminium EN AW-6082. Weight 0,52 kg.
BREMBO RCS 19 brake pump and lever.
BREMBO RCS 19 clutch pump and lever.
AIRBOX Airbox in carbon fiber with air funnels in aluminium EN AW-6082.
BODYWORK Carbon fiber fairing kit. Carefully designed for aerodynamic efficiency. The increased radiator is integrated in the lower fairing to convey effectively the flow of air into the engine. The air ducts positioned are precisely calculated to provide ample air delivery to the pressurised airbox.
BODYWORK Plexiglass in black gradiation. Made of 3 mm thick PMMA cast thermoformed acrylic.
ACCESSORIES MotoGp seat with base in carbon fiber. Made of a 5mm layer of a high density special mousse. It guarantees a perfect grip.
ELECTRIC SYSTEM Dedicated wire cable system for EFI Euro2 ECU. AIM MYCHRON Visor3 dashboard, USB cable, software, speed sensor, eye-finish line, Can derivation.
COLOUR Frame: ROSSO CORSA.
Swing arm, front and rear sub frame: NERO BURN OUT.
Fuel tank: NATURAL ALUMINIUM.
WEIGHT 134* kg

*= Dry weight

Make a request