• This version is compatible with Superbike Ducati 1098R/1198R/749R/999R/748R/996R/998R/916R. The pin, which fits under the steering base, has a diameter of 16,80* mm. The stand, realized in aluminium alloy, has been designed and developed for use at racetrack. It provides two lateral supports for the front brake calipers and one for the front wheel axle. The pin is fitted on high performences bearings. Its special shape, based on a patent filed, facilitates the fitting and removal of the front wheel. The stand can be securely stored inside at its nylon bag, sold separtely. * Before purchasing, it’s always recommended to verify if the pin is compatible with your motorcycle.
  • This version is compatible with Ducati 1098S/1198S/848/999S/749S/748S/998S/916S. The stand, realized in aluminium alloy, has been designed and developed for use at racetrack. It provides two lateral supports for the front brake calipers and one for the front wheel axle. The holder, which goes under the steering base, is fitted on high performences bearings. Its special shape, based on a patent filed, facilitates the fitting and removal of the front wheel.   The stand can be securely stored inside at its nylon bag, sold separtely.
  • Rear paddok stand for: - Ducati Panigale V4; - Ducati Panigale 1199/1299; - Ducati 1098/1198 MY 08/09/10/11. Made in aluminum alloy. Pin diameter 40,60 mm. With high-performances bearings. Designed for use at the racetrack. Its bag is art. E07200C021, sold separately.
  • Rear paddok stand for Ducati 848/748R/916/996S. Made in aluminum alloy. Pin diameter 25,00 mm. With high-performances bearing. Designed for use at the racetrack. Its bag is art. E07200C021, sold separately.
  • Rear paddok stand for Ducati 916R/996R/998R/1098 MY 07 rear stand. Made in aluminum EN AW 6082. Pin diam. 42,80 mm. With high-performances bearing. Designed for use at the racetrack. Its bag is art. E07200C021, sold separately.
  • Locking sleeve for single arm rear stand, cod. E062, E024 and E010. Useful to bike transport.
  • Engine trolley from 350 Pantah to 1198.Made in aluminium alloy.
  • Fairing trolley for Ducati 1098-1198-848 fairings. Made in aluminium alloy. Dismountable. Comes with its bag.
  • Custodia_4e00646caa368.jpg Placeholder
    Nylon bag for front stand.
  • Ducati 1098-1198 Superbike trellis frame in aluminium alloy EN AW 7020. Compatible with 1098/1198/848. The weight of the frame is only 6,50 kg, 30% less than the original. To achieve this objective and maintain the same torsional flex characteristics of the steel alloy version, the engine, footpeg and sospension brackets and headstock are machined from billet to distributes optimally the load on themselves. It has also been added a cross-reinforcement connecting the lower tubes closed to the headstock, that contributes to a greater rigidity of the frame. All the components are joint using interference pin technologie. This allows to direct the forces generated from the frame work to the components and not to the welds. The frame was born to be installed with RS components. It needs of the eccentric bearings bracket. There're 3 configurations:
    • Frame kit for 1098/1198 RS In this option, the frame has the coils and fuel tank brackets located in the same position of RS frames. The RS tank is mounted using two brakets welded on the superior tubes near to the headstock. One of this fitting points is the same that is used on R versions to mount the steering damper bracket. If you have RS steering head, you can fix the steering damper using a fitting point on the headstock. If not, we can offer you a shock absorber clamp. To the frame, you need to add a reinforcement bar in aluminium alloy, that joints the two superior tubes near to the headstock.
     
    • Frame kit for 1098/1198 R With this configuration, you need fuel tank holder and steering damper bracket of the original R frame. Or you can mount the ours, more light because built in aluminium alloy.
     
    • Frame kit for 848/1098/1198 S Also in this case you need need fuel tank holder and steering damper bracket of R version. The frame headstock is bigger than S version, then you need a different front frame or you can adapt yours. Accessories for R e S versions Fuel tank holder and steering damper bracket: Front frame for street and Superbike instrumentations:  
       
  • Frame bracket 1098/1198 SBK, made in aluminium alloy.
  • Fuel tank sub-frame made in aluminium alloy for Ducati 1098R/1198 R.